VTE 771025 Series 10-Point 150 A DC Busbar

The VTE 771025 Series 10-point busbar distributes low-voltage power or ground to ten screw connections from two 1/4-inch terminal posts. It is designed for compact multi-circuit DC wiring in marine, vehicle, battery and industrial equipment.

Electrical ratings

• 150 A maximum continuous load at 12 V DC
• 15 A continuous per connection
• 20 A intermittent per connection for less than one minute
• 48 V DC maximum system voltage

Construction and installation

• Ten #8-32 stainless-steel connection screws
• Two 1/4-inch stainless-steel terminal posts
• Stainless-steel hex nuts and lock washers
• Glass-filled nylon base in red or black
• 4.66-inch mounting centres
• #10 mounting screws required; screws are not included

Available models

Cover options

The busbar is supplied without a cover. Compatible VTE 724 Series covers are available separately in red (724N3P02), yellow with blue retainers (724N3P05) and black (724N3P14). When used with the specified insulation, the assembly is designed to meet the cited USCG 33 CFR Subpart I, SAE J2120 8.5 and ABYC E-9.4 H requirements.

Supplier lead time is typically 5–8 working days when available from stock; replenishment can take up to 8 weeks. Contact OEM Nordic to confirm availability.

View manufacturer family information

Order by 2PM to get delivered next working day! We use 24 hours service with carriers in most cases so that you can get your order delivered on time.

There is €4.99 charge for delivery under €50 Orders. Additional charges will be imposed by our couriers for delivery to remote area, a surcharge may be levied to cover carriage to these areas.

Your product is covered by a 12 month Warranty or more if you opted for the extended warranty. Make sure you register your product.