Good vibration data starts
at the measurement point.
Choose the accelerometer, cable and mounting arrangement together. OEM NORDIC helps you match the sensor chain to your machine and VibSys A01 installation.
Select the right accelerometer
Top-exit and side-exit designs offer different cable-routing options. Check sensitivity, measurement range, frequency response, mounting and available clearance before choosing.
| Manufacturer code | Sensor | Unit price, excl. VAT |
|---|---|---|
| ISTACCTE10 | Basic AC accelerometer · top exit | €237.50 |
| ISTACCTS10 | Standard AC accelerometer · top exit View product |
€303.75 |
| ISTACCSS10 | Standard AC accelerometer · side exit View product |
€407.50 |
| ISTACCSI10 | Intrinsically safe accelerometer · side exit View product |
€661.25 |
| ISTACCSS20 | Premium industrial accelerometer · side exit View product |
€762.50 |
Prices are for individual units. Confirm availability and the final sensor configuration when ordering. For ISTACCTE10, request confirmation of the electrical specifications before selecting it for A01.
Match the complete signal chain
VibSys A01
Istec's A01 datasheet specifies direct inputs for 2-wire IEPE accelerometers at 100 mV/g. The ISTACCTS10 and ISTACCSS10 datasheets specify 100 mV/g and a 2–10 mA supply range, encompassing A01's 4.5 mA sensor supply. Confirm the full application and cable arrangement before purchase.
Hazardous locations
ISTACCSI10 is the intrinsically safe option in this range. Select the required barrier or isolator and verify the complete installation against the sensor documentation. The sensor's approval does not make the entire monitoring system intrinsically safe.
RecipSys 200
Rod-drop measurements use eddy-current displacement probes and a phase-reference signal. The accelerometers on this page do not replace that probe system.
Plan a rod-drop system →Cables and mounting accessories
Specify connector type, required cable length and mounting thread with your enquiry. Check fit and suitability for the selected sensor; the items below are selection options, not a universal accessory kit.
| Manufacturer code | Accessory | Unit price, excl. VAT |
|---|---|---|
| ISTCABAY10 | Yellow PTFE accelerometer cable · 10 m | €158.75 |
| ISTCABAY11 | Yellow PTFE cable with rubber boot · 10 m | €263.75 |
| ISTCABAC11 | Blue PTFE cable with rubber boot · 10 m | €455.00 |
| ISTMOU0010 | Stud · 1/4-28 UNF male to 1/4-28 UNF male | €11.25 |
| ISTMOU0011 | Stud · 1/4-28 UNF male to M6 male | €11.25 |
| ISTMOU0012 | Stud · 1/4-28 UNF male to M8 male | €11.25 |
| ISTMOU0021 | Conical stud · 1/4-28 UNF female to M8 male | €53.75 |
| ISTMOU0022 | Conical stud · 1/4-28 UNF female to M10 male | €53.75 |
| ISTMOU0030 | Glue-face mounting stud · 1/4-28 UNF male to Ø19 mm glue face | €21.25 |
Tell us what you need to measure
Include machine type, measurement points, temperature, hazardous-area requirements, cable route, mounting thread and quantities. We can then confirm a suitable sensor and accessory selection with your quotation.