Istec SpeedSys T10 single-channel speed monitor

Your Jaquet T401, T402 or T412 is discontinued, and the machine still needs a speed switch. Istec SpeedSys T10 is the functional replacement: one sensor input, two high-speed relays, 4–20 mA, frequency output and Modbus TCP in a single unit. OEM NORDIC supplies it.

Watch the T10 work, step by step

One speed sensor signal goes in; relay action and outputs come out. Walk through it in 3D, with illustrative values. Press play or jump to a chapter.

Istec SpeedSys T10 speed monitor
  • Everything on one channel. Two relays, 4–20 mA, frequency output, digital input, Modbus TCP.
  • Measured and switched quickly. 0.3 Hz–35 kHz, 0.05 % accuracy, relay hardware 4 ms or less.
  • Small footprint. DIN-rail housing 22.5 mm wide.
  • Drop-in route off Jaquet. T401, T402, T412.

Find the right replacement

Tell us the Jaquet type and how many units you need. We name the right SpeedSys. One unit goes straight into the webshop; for several units we quote a price.

Questions we hear most

Which Jaquet tachometers does T10 take over from?

T401, T402 and T412 – Istec developed T10 for exactly these. The T411 has its own successor, T11, with a built-in display. Send us the Jaquet type and we confirm the match before you order.

Do I have to change my speed sensors?

Usually not. T10 accepts three-wire Hall, PNP, NPN and eddy-current sensors and two-wire electromagnetic sensors, and it flags a broken sensor circuit.

How quickly does it react?

Relay hardware responds in 4 ms or less. Typical total reaction is 14 ms or less at the default measuring time, and 6 ms or less at 2 ms.

Can T10 act as overspeed protection?

T10 is a speed monitor and switch. For certified overspeed protection, ask about SpeedSys 200.

Also in this series: All SpeedSys models · T20 explainer · T30 explainer.

Sources: Istec SpeedSys datasheet v1.20, Istec’s functional-replacement letter for the Jaquet T4xx/T5xx/T6xx range and Istec’s life-cycle statement of 26 April 2024. Jaquet is a trademark of its owner TE Connectivity. SpeedSys is developed and manufactured by Istec; supplied by OEM NORDIC, a business name of MK-Controls Oy.