LED 适配器 LA 12-7
Couldn't load pickup availability
This is a genuine Briechle Elektronik product. All items sold are brand new and delivered in the manufacturer’s original, unopened packaging.
Got questions? Need a Quotation?
Feel free to get in touch
Ask an expert!
12伏电阻更换负载 改装发光二极管（LED）拖车灯，用于 白炽灯监控。LED 单元的故障会显示出来， 替换负载关闭。LED-ADAPT 必须安装在 金属表面。
***警告***
禁止在输出端连接任何灯泡。过流保护可能要几分钟后才会切断！
▪ 工作电压：12V 标称
▪ 输入：开放电缆端
▪ 输出：开放电缆端
重量：1.68 公斤
- 只需在 LED 灯前进行连接
- LED 故障指示
- 短路指示
- 为所有线路提供替换电阻器
- 3.5米输入电缆可直接连接到插头
| 手术 电压： | 12V 标称 |
| 输出电流： | 0.8A（过流保护延时1…2000秒！） |
| 连接输入： | 护套电缆 8x1mm²，裸线端 |
| 连接输出： | 护套电缆 8x1mm²，裸线端 |
| 负载模拟： | 2x17 W（方向灯）、2x4W（尾灯）、1x34W（刹车灯）1x17W (雾灯),1x17W (倒车灯) |
| 电缆长度输入： | 约 3.5 米 |
| 电缆长度输出： | 约1.2米 |
| 温度范围: | -40 ... +75°C |
| 电气保护： | 过流、过热、反极性 |
| 机械保护： | 完全密封 |
| 方面： | 280 x 70 x 25mm（无电缆出口） |
| 大量的： | 约1680克 |
| 故障监视器 LED： | 20mA（方向灯）3mA（尾灯）8mA（刹车灯）8mA（雾灯） 20mA（倒车灯） |
| 安装规则： | 冷却板 8dm² (铝板 1.5mm 厚度) 或 底盘框架 |
Documentation Availability
Full technical documentation including detailed product datasheets, 3D STEP files, dimensional drawings, declarations of conformity and other certificates is available upon request.
Please contact our technical sales department at sales@oemnordic.com.
Certain controlled documents are provided directly to customers and are not distributed publicly online.
Orders are processed within the same day. We do use air express service with carriers FedEx, DHL, UPS so that you can get your order delivered on time with tracking included in every parcel sent out.
Your product is covered by a 12 month Warranty or more if you opted for the extended warranty. Make sure you register your product.