Led Adapter LA 12-2EK

In stock
Regular price ā‚¬94,00 EUR

Feel free to share word of our service:

..or just ask one of our experts

12 Volt resistor replacement load for the adaptation of light-emitting diode (LED) trailer lamps at vehicles with incandescent lamp monitoring. The failure of direction indicators is indicated.

***CAUTION***
LED-ADAPT must be mounted on a metal surface. The connection of any bulb on the direction indicator output is prohibited. The overcurrent protection may cut off not until after several minutes!


ā–Ŗ Operating voltage: 12V nominal
ā–Ŗ as ballast for LED direction indicators
ā–Ŗ operates right and left turn signals

Weight: 0.35 kg

  • Single cable version
  • LED direction indicator monitoring
  • Serves the direction indicators with replacement resistors
  • Conditionally short circuit proof (about 100 cycles)
Operation voltage: 12V nominal
Output current: max. 0.4A (direction) (Over current protection time delay 1...2000s!)
Connection: Hose line 5x1mmĀ², ins. 6.3mm blade receptacle
Load imitation: 2x17W (direction)
Cable length: 0.25 m
Temperature range: -40...+75Ā°C
Electrical protection: Overcurrent, overtemperature, reverse polarity
Mechanical protection: Entirely sealed (IP69K)
Dimensions: 120 x 70 x 25mm
Mass: app. 350g
Failure monitor LEDs: 20mA (direction)
Mounting rule: Cooling plate 8dmĀ² (aluminum sheet 1.5mm thickness) or on chassis frame