Converter "Mobil-Netz" Sw 600A-12
Couldn't load pickup availability
..or just ask one of our experts
Notify me when available
We will send you a notification as soon as this product is available again.
Professional inverter 12V to 230V AC for rough environmental conditions.
▪ IN: 12V / OUT: 230V/50Hz
▪ Input: 2x open cable ends
▪ Output: open cable ends
Weight: 8 kg
- waterproof
- starts automatically, 5mA standby
- perfectly suitable for fixed installation in service vehicle, separate socket
- 100% overload possible
- Attention: no sinus, but almost all consumers can be connected
| Input voltage: | 10 ... 15V DC |
| Output voltage: | 225V +3% / -5%, 50Hz quartz-generated (115V/ 60Hz optional) |
| Output power: | 600VA permanent, 1,200VA 10min, 12A (24A at 115V) 4sec |
| Connection input: | 2x open cable end |
| Connection output: | open cable end |
| Cable length input: | 2x app. 1200mm |
| Cable length output: | app. 2300mm |
| Current without load: | standby current 5mA RMS at 12V |
| Switching level: | start at 1W load |
| Current at 1W load: | 1A at 12V |
| Overvoltage: | >16V, self-resetting |
| Undervoltage: | off at 10V, on at 11V |
| Efficiency: | app. 95% at 100% load / app. 80% at 10% load / app. 80% at 200% load |
| Electrical protection: | against reverse polarity, overtemperature, short circuit |
| Mechanical protection: | aluminum casting case IP66 |
| Dimensions: | 260 x 160 x 90mm (without screwings) without cable outlet |
| Mass: | app. 8,000g incl. Cables |
| Signalform: | step weave with fast PWM-modulation (to cos phi 0.2 at 50% load) |
| Safety: | potential division with potential compensation (protective conductor) |