Briechle LED ADAPTER LA 12-2EK
Regular price
€94,80 EUR
Regular price
-12%
€107,73 EUR
Sale price
€94,80 EUR
Couldn't load pickup availability
Share our service:
12 Volt resistor replacement load for the adaptation of light-emitting \ndiode (LED) trailer lamps at vehicles with incandescent lamp monitoring.\n The failure of direction indicators is indicated.
***CAUTION***
LED-ADAPT\n must be mounted on a metal surface. The connection of any bulb on the \ndirection indicator output is prohibited. The overcurrent protection \nmay cut off not until after several minutes!
▪ Operating voltage: 12V nominal
▪ as ballast for LED direction indicators
▪ operates right and left turn signals
\n\n \n
\n \n Weight: 0.35 kg\n \n
\n
- Single cable version
- LED direction indicator monitoring
- Serves the direction indicators with replacement resistors
- Conditionally short circuit proof (about 100 cycles)
| Operation\n voltage: | \n12V nominal | \n
| Output current: | \nmax. 0.4A (direction) (Over current protection time delay\n 1...2000s!) | \n
| Connection: | \nHose line 5x1mm², ins. 6.3mm blade receptacle | \n
| Load imitation: | \n2x17W (direction) | \n
| Cable length: | \n0.25 m | \n
| Temperature range: | \n-40...+75°C | \n
| Electrical protection: | \nOvercurrent, overtemperature, reverse polarity | \n
| Mechanical protection: | \nEntirely sealed (IP69K) | \n
| Dimensions: | \n120 x 70 x 25mm | \n
| Mass: | \napp. 350g | \n
| Failure monitor LEDs: | \n20mA (direction) | \n
| Mounting rule: | \nCooling plate 8dm² (aluminum sheet 1.5mm thickness) or on\n chassis frame | \n