Home » Briechle LED ADAPTER (BYPASS) LAB 12-7
LED ADAPTER (BYPASS) LAB 12-7
LED ADAPTER (BYPASS) LAB 12-7
Briechle

Briechle LED ADAPTER (BYPASS) LAB 12-7

In stock
MPN / Barcode:: 11223
(0)
€274,03 EUR
-12% €311,40 EUR €274,03 EUR

Share our service:

12 Volt resistor replacement load for the adaptation of light-emitting \ndiode (LED) trailer lamps at vehicles with incandescent lamp monitoring.\n The failure of a LED unit is indicated and the replacement load is \nturned off. To cool the system a metal surface is needed. The \nBypass-function enables subsequent mounting of bulbs up to 95W.


▪ Operating voltage: 12V
▪ Input: open cable end
▪ Output: open cable end

\n\n \n
\n \n Weight: 1.68 kg\n \n

\n
  • Simply connect ahead of LED lamps
  • LED-failure is indicated
  • The input will be connected to the output in a bulb connection
  • Serves all lines with replacement resistors
  • Short circuit proof
  • Input cable 3,5m can be connected directly to the plug
\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n
Operation\n voltage:12V nominal
Output current:max. 8A each line (bypass on)
Connection input:Sheathed cable 7x1+1x2,5mm², bare endings
Connection output:Sheathed cable 7x1+1x2,5mm², bare endings
Load imitation:2x17 W (direction), 2x4W (rear lamp), 1x34W (stoplight) 1x17W\n (fog lamp), 1x17W (reversing lamp)
Cable length input:app. 3,5m
Cable length output:app. 1,2m
Temperature range:-40...+75°C
Electrical protection:Overcurrent, overtemperature, reverse polarity
Mechanical protection:entirely sealed (IP69K)
Dimensions:280 x 70 x 25mm
Mass:app. 1680g
Failure monitor LEDs:24mA (direction), 860mA bypass,\n 6,5mA (rear lamps), 600mA bypass, 9mA (stoplight), 1510mA bypass, 9,5mA\n (rear fog lamp), 860mA bypass, 24mA (reversing light), 860mA bypass
Mounting rule:cooling plate 8dm² (aluminum sheet 1.5mm thickness) or on\n chassis frame