BFS-072244 | BFS Replacement Float Ø22 x 44mm (T1 71 / T2 56)

This BFS replacement float (Ø22 mm, height 44 mm) is the shut-off float used inside BFS push-in III watering plugs to automatically stop water flow once the correct electrolyte level is reached. Use it to replace a worn or damaged float without replacing the entire plug.

Key Specifications:

• Diameter: 22 mm (standard BFS float size)
• Height: 44 mm
• T1 (Push-in III): 71 mm — distance from the top of the cell vent to the base of the float
• T2 (Push-in III): 56 mm — distance from the top of the cell vent to the electrolyte fill level

Choosing the Right Float:

Float size depends on plug type, cell vent diameter, and the T-measurement (depth from the top of the cell vent to the separator/electrolyte level) on the specific battery. Check your battery's T-measurement against the T1/T2 values above before ordering, or compare against the other BFS float sizes in our BFS Battery Watering Systems collection.

Applications:

Replacement part for BFS single-point watering systems on lead-acid batteries in forklifts, mining and ground support equipment, and other industrial/traction battery fleets.

Part number: BFS-072244 (Float 71/56 - D22mm - H44mm).

Order by 2PM to get delivered next working day! We use 24 hours service with carriers in most cases so that you can get your order delivered on time.

There is €4.99 charge for delivery under €50 Orders. Additional charges will be imposed by our couriers for delivery to remote area, a surcharge may be levied to cover carriage to these areas.

Your product is covered by a 12 month Warranty or more if you opted for the extended warranty. Make sure you register your product.