Led Adapter (Bypass) LAB-24-7

In stock
Regular price €271,00 EUR

24 Volt resistor replacement load for the adaptation of light-emitting diode (LED) trailer lamps at vehicles with incandescent lamp monitoring. The failure of a LED unit is indicated and the replacement load is turned off. To cool the system a metal surface is needed. The Bypass-function enables subsequent mounting of bulbs up to 180W.


▪ Operating voltage: 24V
▪ Input: open cable end
▪ Output: open cable end

Weight: 1.68 kg

  • Simply connect ahead of LED lamps
  • LED-failure is indicated
  • The input will be connected to the output in a bulb connection
  • Serves all lines with replacement resistors
  • Short circuit proof
  • Input cable 3,5m can be connected directly to the plug
Operation voltage: 24V nominal
Output current: max. 8A each line (bypass on)
Connection input: Sheathed cable 7x1+1x2,5mm², bare endings
Connection output: Sheathed cable 7x1+1x2,5mm², bare endings
Load imitation: 2x17 W (direction), 2x4W (rear lamp), 1x34W (stoplight) 1x17W (fog lamp), 1x17W (reversing lamp)
Cable length input: app. 3,5m
Cable length output: app. 1,2m
Temperature range: -40...+75°C
Electrical protection: Overcurrent, overtemperature, reverse polarity
Mechanical protection: entirely sealed (IP69K)
Dimensions: 280 x 70 x 25mm
Mass: app. 1680g
Failure monitor LEDs: 24mA (direction), 860mA bypass, 6,5mA (rear lamps), 330mA bypass, 9mA (stoplight), 1510mA bypass, 9,5mA (rear fog lamp), 860mA bypass, 24mA (reversing light), 860mA bypass
Mounting rule: cooling plate 8dm² (aluminum sheet 1.5mm thickness) or on chassis frame