How to crimp a DIN contact for REMA and Anderson Power Products DIN connectors?
Crimping is a process used to make a mechanical connection between a wire and a connector. This process is commonly used in the electrical industry to create a secure and reliable connection. In this article, we will be discussing how to crimp a DIN contact for REMA and Anderson Power Products (APP) DIN connectors.
Before you begin, you will need the following tools:
- A crimping tool
- A wire cutter or stripper
- A pair of pliers
- APP or REMA DIN contact ( or DIN connector)
Step 1: Prepare the wire The first step in crimping a DIN contact is to prepare the wire. Use a wire cutter or stripper to remove a small section of the insulation from the wire. The length of the exposed wire will depend on the specific DIN connector you are using. Refer to the instructions for the connector for the appropriate wire length.
Step 2: Insert the wire into the DIN contact Once the wire is prepared, insert it into the DIN contact. Make sure that the wire is fully seated in the connector and that the exposed wire is the correct length.
Step 3: Crimp the DIN contact Using the crimping tool, crimp the DIN contact onto the wire. The crimping tool will have multiple jaws that will compress the connector onto the wire. Make sure to crimp the connector in the correct location, as specified by the instructions.
Step 4: Inspect the connection After crimping the DIN contact, inspect the connection to make sure that it is secure and that the wire is fully seated in the connector.
Step 5: Repeat the process Repeat the above steps for any additional wires that need to be connected to the DIN connector.
In conclusion, crimping a DIN contact for REMA and Anderson Power Products DIN connectors is a simple process that can be done with the right tools. The key is to prepare the wire correctly and to use the appropriate crimping tool to create a secure and reliable connection.